|
|
"Stormwater Compliance Made Easy"
ADSORB-it Catch Basin Filters for Dry Wells & Round Catch Basin Structures
"ADSORB-it Filtration Designed for Round Catch Basins"
- Designed to Prevent Contamination in Shallow Disposal Systems
- Stainless Steel Frame Riveted to a Heavy-duty Filter Basket
- Fits Standard 24" to 36" Diameter Cast-Iron Frame/Grates
- Long-Lasting Hi-Flow ADSORB-it Filtration Fabric (+80-GPM)
- Filter Basket Contains High Adsorbent Filtration Media Inside
- Captures Fats, Oils & Grease in Excess of 5-gallons
- Prevents Soil & Groundwater Contamination
- Captures Gross Sediments & Debris (+100-lbs.)
- Filters out Total Suspended Solids (TSS Removal = 90.5%)
- Washable, Cleanable & Re-Usable Many Times Over
- Can Be Retrofitted With A Sample Collection Port
- Industrial, Commercial & Residential Applications
- Meets EPA & Ecology NPDES BMP Requirements
- Effective Non-Point Source Pollution Prevention
Catch Basin Filter Baskets
CBI Stormfilter Baskets
"Catch Basin Insert Basket Without the ADSORB-it Fabric"
- Heavy-Duty Industrial Strength Hi-Flow Trash & Debris Filter
- Made with Industrial Grade T-104 Stainless Steel (14-ga. or 16-ga.)
- Fits Catch Basin Frame/Grate Sizes from 12"x 12" to Larger 36"x 48"
- Designed to Hold Over 100-lbs of Trash & Debris Larger than 1"
- Comes with Side Frame Ports for Overflow Protection
- Has 1/8" PVC Coated Wire Lifting Cables Supported Under the Frame
- Custom Frames & Larger Screen Basket Sizes Available
- Can be Retrofitted with ADSORB-it Fabric or Nylon Mesh Screen Liner
Large Capacity ADSORB-it Catch Basin Filters
ADSORB-it Catch Basin Filters - Captured Sediments & Debris
Catch Basin Filter Basket w/ Nylon Mesh Liner
"Catch Basin Filter Basket with Nylon Mesh Screen Liners"
- Hi-Flow 800-to-1200-NMO Filter Screen Liner Sizes
- CB Filter Frames Made with T-104 Stainless Steel or Aluminum
- Heavy-Duty PVC Coated Wire Filter Basket Riveted to Frame
- Largest Sediment & Debris Filter on the Market
- Holds Over 100-lbs of Heavy Solids & Debris
- Filters-Out Suspended Solids down to 100-Microns
- Can Be Retrofitted with our ADSORB-it Fabric Liner or Pillows
- Great for Holding Industrial & Construction Debris Material
- Long-lasting, Completely Cleanable, Washable & Reusable
- 1/8" PVC Coated Wire Lifting Cables Supported Under the Frame
- Comes With Side Frame Ports for Overflow Protection
- Cost-Effective Storm/Surface Water Filtration Device
- Meets NPDES Industrial & Construction BMP Requirements
- Meets Temporary Erosion & Sediment Control (TESC) Requirements
- Can Be Used to Contain Metals Adsorbing Filter Media
- Can Be Retrofitted with 4" & 6" Sample Collection Ports
Hi-Flow Nylon Filter Liners
"Nylon Mesh Filter Liners for the CBI Stormfilter Baskets"
- Holds Sediments/Debris & Filters Down to 50-Microns
- 800-to-1200 NMO Filter Screen Sizes
- Supports Hi-Flow Filtration Rates (200-GPM+)
- Nylon Mesh Liners are: Cleanable, Washable & Reusable
- Filter Liners Can be Made in Many Sizes/Configurations
- Holds Various Types of Adsorbent Filter Media
- Ideal for Small or Multiple De-watering Applications
- Large Capacity Sediment & Debris Filtration (100-lbs +)
ADSORB-it Stormfilter Fabric Liners
ADSORB-it Liners for the Catch Basin Filter Baskets
- Affordable ADSORB-it Filter Fabric Replacement Liners
- Custom Fitting for all ADSORB-it Stormfilter Sizes
- Filter Liners Made for many Sizes/Configurations
- Fast & Easy to Replace Catch Basin Insert Liners
- Fabric is Secured by Heavy-duty Velcro Strips
- Cleanable, Washable & Reusable ADSORB-it Fabric Liners
- Made from 100% Recycled Textile Fabric
- Green Technology Product
- EPA NPDES Approved BMP Product
- Side Ports with PVC Coated Steel Lifting Cables
ADSORB-it Catch Basin Filters - Stormwater Sampling Made Easy
ADSORB-it Stormfilters with Sample Collection Ports
- Eliminate Removing Your CB Filter to take Samples
- Retrofitted with Standard 4" or 6" PVC Sample Ports
- Collect Samples Without Removing the Filter Device
- 4" Sample Port Supports 1" & 2" Weighted Sample Bailers
- 6" Sample Port Supports The NASCO Swing Sampler
- Solid Cap, Screen Cap or Expandable Pipe Plug
- Made from Light Weight PVC Construction
- Sample Port Can Also be Used as a Inspection Port
- Sample Port Can be Used as Additional Overflow Protection
- Sample Port Fits Most Sample Collection Devices
- Heavy-duty Lifting Cables Support Under the Frame
- Custom Filter Sizes & Port Depths Available
Manhole Cover/Catch Basin Grate Lifting Tool
"Heavy-duty Manhole Cover / Catch Basin Grate Lifting Tool"
- Made from 5/8" Hex Hi-Carbon Forged Steel
- Rotated Handle & Rocker Head for Removing Stubborn Covers
- Powder Coated for Corrosion Protection
- Comes in 3-Colors: Black, Red or Blue
- 2 Standard Sizes Available: 26.5" & 34.5" Length's
- Most Utilized MH Cover & CB Grate Puller on the Market
ADSORB-it Stormfilter BMP Product Specifications
AQUACLEAR Dockside Stormfilter Units
Stormwater Biochar Filter Media Testing Data
